Biography
ISO-45001-Lead-Auditor Simulated Test 100% Pass | Trustable PECB PECB Certified ISO 45001 Lead Auditor Exam Exams Dumps Pass for sure
Choosing ValidExam's ISO-45001-Lead-Auditor exam training materials is the best shortcut to success. It will help you to pass ISO-45001-Lead-Auditor exam successfully. Everyone is likely to succeed, the key lies in choice. Under the joint efforts of everyone for many years, the passing rate of ValidExam's PECB ISO-45001-Lead-Auditor Certification Exam has reached as high as 100%. Choosing ValidExam is to be with success.
| Topic |
Details |
| Topic 1 |
- Closing an ISO 45001 audit: This section of the exam measures the skills of Audit Consultants and covers the procedures for concluding an ISO 45001 audit. It emphasizes reporting results, discussing findings with stakeholders, and ensuring follow-up actions are planned.
|
| Topic 2 |
- Fundamental audit concepts and principles: This section of the exam measures the skills of Internal Auditors and covers the basic concepts and principles related to auditing an OHSMS. It focuses on understanding audit types, methodologies, and the role of audits in compliance and improvement. One skill to be measured is conducting effective audits to assess OHSMS performance.
|
| Topic 3 |
- Domain 4: Preparing for an ISO 45001 audit: This section of the exam measures the skills of Audit Consultants and covers the preparation process for conducting an ISO 45001 audit. It emphasizes planning, resource allocation, and establishing audit objectives to ensure a thorough evaluation.
|
| Topic 4 |
- ISO 45001 requirements for an OH&S MS – Clauses 4 to 10: This section of the exam measures the skills of Auditors related to specific requirements outlined in ISO 45001 about occupational health and safety management systems. It emphasizes understanding clauses that address context, leadership, planning, support, operation, performance evaluation, and improvement. A skill to be measured is applying ISO 45001 requirements to organizational practices.
|
>> ISO-45001-Lead-Auditor Simulated Test <<
{Offline Fast} PECB ISO-45001-Lead-Auditor Practice Exam Software
No matter how much you study, it can be difficult to feel confident going into the PECB Certified ISO 45001 Lead Auditor Exam (ISO-45001-Lead-Auditor) exam. However, there are a few things you can do to help ease your anxiety and boost your chances of success. First, make sure you prepare with Real ISO-45001-Lead-Auditor Exam Dumps. If there are any concepts you're unsure of, take the time to take ISO-45001-Lead-Auditor practice exams until you feel comfortable.
PECB Certified ISO 45001 Lead Auditor Exam Sample Questions (Q39-Q44):
NEW QUESTION # 39
You are conducting a Stage 2 certification audit to ISO 45001 at an adventure park in the Scottish Highlands. The park offers treetop walks, zip-line rides, walking trails, and horse-riding trips. The park is open to adults and children of any age. You are particularly interested in compliance with legal requirements and interview the Park Manager.
You: How do you evaluate the risks to participants that the various activities present?
Park Manager: Our risks are covered by insurance, and we operate under health and safety legislation that requires frequent checks of all our facilities. For example, we trust staff to check all our harnesses every morning.
You: Are you required to have an independent inspection carried out of zip lines, for example?
Park Manager: Yes, our insurance company employs a reputable body to do that sort of thing.
You: Can you show me a copy of the latest inspection report? Park Manager: I'd need to get that from the insurance organisation. I have the initial one when we opened eight years ago.
You examine the inspection report, which takes the form of a checklist that does not identify individual zip lines, treetop platforms, harnesses, or rope ladders. It is dated eight years previously and has a scribbled signature with no other identification of the inspection engineer. Select the two statements for which there is evidence of a nonconformity to ISO 45001.
Select two statements.
- A. Testing to determine the safe loading of equipment was not carried out.
- B. The park did not have the required documentation to demonstrate compliance with legal requirements.
- C. The inspection organisation employed by the insurance organisation was not evaluated.
- D. The organisation did not monitor the safety checks by the staff of equipment.
- E. The park relied on the insurance organisation to evaluate its OHS risks.
Answer: B,C
Explanation:
ISO 45001 requires organizations to identify and maintain documentation to demonstrate compliance with legal and other requirements (Clause 7.5 and Clause 9.1.2). It also requires the evaluation and control of outsourced processes (Clause 8.1.4.3).
Analysis of Options:
A . The park did not have the required documentation to demonstrate compliance with legal requirements:
Correct. The outdated and incomplete inspection report (8 years old, lacking detailed identification) fails to demonstrate compliance with health and safety legislation.
B . The organization did not monitor the safety checks by staff of equipment:
Incorrect. While there is a potential gap in monitoring, the evidence provided does not directly indicate a lack of monitoring of staff checks.
C . The inspection organization employed by the insurance organization was not evaluated:
Correct. ISO 45001 requires the organization to evaluate outsourced services, including those provided by the inspection body, to ensure their adequacy.
D . The park relied on the insurance organization to evaluate its OHS risks:
Incorrect. Reliance on external evaluations may not constitute a nonconformity if risks are properly managed, but there is no evidence provided for noncompliance here.
E . Testing to determine the safe loading of equipment was not carried out:
Incorrect. While load testing is crucial, there is no evidence presented to confirm this specific issue as a nonconformity.
ISO Reference:
Clause 7.5: Control of documented information.
Clause 8.1.4.3: Control of outsourced processes.
Clause 9.1.2: Evaluation of compliance.
NEW QUESTION # 40
What does ISO 45001 say are the hazards that have to be considered when planning a health and safety management system? Select the ONE best answer.
- A. Work hazards and environmental factors such as bad weather
- B. Work activities where there is the possibility of danger
- C. Hot-work, working at height, enclosed space entry, and work on electrical equipment
- D. Work activities, workplace design, and human factors such as hours of work and bullying and harassment
Answer: D
Explanation:
ISO 45001:2018 requires a holistic approach to occupational health and safety. This means considering all aspects that could impact worker well-being, not just obvious physical hazards. The correct answer encompasses work activities (the tasks themselves), workplace design (the physical environment), and human factors (psychological and social aspects like working hours and harassment). It's the most comprehensive and aligned with the standard's philosophy ISO 45001:2018, Clause 6.1.2, outlines requirements for hazard identification. Hazards to consider include work activities, workplace design, human factors, and social factors that may impact OH&S. These go beyond traditional physical risks and include psychosocial and organizational hazards.
Analysis of Options:
A . Work activities, workplace design, and human factors such as hours of work and bullying and harassment:
Correct. This comprehensively addresses hazard categories outlined in ISO 45001, Clause 6.1.2.
B . Work activities where there is the possibility of danger:
Too general. ISO 45001 includes broader categories of hazards, including those related to organizational and social factors.
C . Hot-work, working at height, enclosed space entry, and work on electrical equipment:
Too narrow. These are specific hazards but do not encompass the full range outlined in ISO 45001.
D . Work hazards and environmental factors such as bad weather:
Incomplete. While environmental factors are relevant, ISO 45001 also includes workplace design, human factors, and psychosocial hazards.
ISO Reference:
Clause 6.1.2.1: Hazard identification.
Annex A.6.1.2: Examples of hazard categories, including workplace design and human factors.
NEW QUESTION # 41
During a second-party audit at a sawmill, you find that the OHSMS Manager conducted the hazard identification process. In the risk assessment report, hazards were listed as physical hazards, chemical hazards, biological hazards and psychosocial hazards, with the hazards categories as low medium and high to be addressed. The OHSMS Manager did not have an action plan for low and medium risks, saying that they ignored those He stated that they brought in a health and safety consultant to advise on treatment for the high risks.
When interviewing the OHSMS Manager, the auditor presents a nonconformity relating to potential hazards In the factory If the dust extraction system broke down. The OHSMS Manager said that. If that happened, the agreed planned action is that workers would put masks on.
Select one of the options for how the auditor should respond to this statement.
- A. Suggest that they should increase their maintenance checks.
- B. Seek evidence that the response action is both Implemented and effective.
- C. Advise that the factory should cease its operations It the dust extraction equipment malfunctioned.
- D. Ask the OH5MS Manager to confirm that this action meets regulatory requirements for air purity.
Answer: B
Explanation:
The auditor should assess whether the organization's planned action (using masks in case of dust extraction failure) is both implemented and effective. This aligns with ISO 45001 requirements to ensure that control measures are functional and meet the intended objectives.
Clause 8.1.2 (Hierarchy of Controls):
The use of PPE, such as masks, is considered a last resort in the hierarchy of controls. The organization must demonstrate that the measure is:
Implemented (e.g., PPE is available and workers are trained to use it).
Effective (e.g., masks provide adequate protection against dust).
Analysis of Options:
A . Advise that the factory should cease operations if the dust extraction equipment malfunctioned.
While ceasing operations may be a necessary control in extreme situations, it is not a practical or realistic recommendation unless a high-risk scenario cannot be otherwise managed.
B . Ask the OHSMS Manager to confirm regulatory compliance.
Regulatory compliance is important but does not fully address the requirement to ensure the action is effective.
C . Seek evidence that the response action is both implemented and effective.
This is the most appropriate response. The auditor must verify implementation and effectiveness to determine conformity.
D . Suggest increasing maintenance checks.
Maintenance is important for preventing equipment breakdowns, but this option does not address the immediate audit finding about the adequacy of response actions.
ISO Reference:
Clause 8.1.2: Emphasizes applying the hierarchy of controls effectively.
Clause 9.1.1: Requires monitoring and measuring controls to ensure effectiveness.
NEW QUESTION # 42
An audit team leader arrives at a steel fabrication organisation that manufactures stairways to carry out a Stage2 certification audit. At a meeting with the OHSMS Manager, she is told that they have won their biggest contact from a construction organization to manufacture and install stairways.
During the audit, a team member found that several employees had suffered hand injuries over several months due to handrail welds not being property polished. The OHSMS Manager blames the new employees they had to take on because of the big contract. The auditor raises a nonconformance against clause 10.2 erf ISO 45001.
In relation to the nonconformity raised by the auditor and in line with the policy of the certification body, the audit team raise improvement opportunities in the audit report.
Which three of the options would represent acceptance opportunities for improvement in the report?
- A. A first aid station could be located next to the handrail polishing operation.
- B. Operational planning activities may benefit from an improved risk based approach based on international standards tor risk management.
- C. The molding polishers should be disciplined for Incompetency.
- D. A quality control programme could involve non-destructive testing of the welded handrails
- E. The induction programme for new employees could include an awareness training video in health and safety.
- F. All workers should be given competence test.
- G. Additional internal audits of the OHS management system may reduce production problems.
- H. The requirement for wearing protective gloves could be extended to shop floor workers across all operations.
Answer: B,E,H
Explanation:
Comprehensive Detailed Explanation along with All ISO 45001 Audit Reference Opportunities for improvement (OFIs) are suggestions provided during audits that do not indicate nonconformities but are aimed at enhancing the system's performance.
Analysis of Options:
A . A quality control program could involve non-destructive testing of the welded handrails:
While beneficial, this focuses on product quality rather than OH&S improvements.
B . Operational planning activities may benefit from an improved risk-based approach based on international standards for risk management:
Correct. Enhancing risk-based thinking aligns with Clause 6.1.1.
C . A first aid station could be located next to the handrail polishing operation:
While useful, first aid station placement is an operational matter, not directly related to OH&S management system improvement.
D . Additional internal audits of the OHS management system may reduce production problems:
Internal audits should address system performance, not production problems.
F . The induction program for new employees could include an awareness training video on health and safety:
Correct. Enhanced training for new employees addresses Clause 7.2 (competence).
G . The requirement for wearing protective gloves could be extended to shop floor workers across all operations:
Correct. This improves hazard control in line with Clause 8.1.2.
H . The molding polishers should be disciplined for incompetency:
Disciplinary actions are outside the scope of system improvement.
ISO Reference:
Clause 6.1.1: Risk management.
Clause 7.2: Competence.
Clause 8.1.2: Hierarchy of controls.
NEW QUESTION # 43
You are in the closing meeting of a second-party audit to ISO 45001. Which three of the following topics are most likely to come for discussion?
- A. Whether the work instructions for a specify auditee OH&S process are focused on efficiency.
- B. The names and email address of a attendees at the closing meeting. The question of who should chair the closing meeting.
- C. nature of the trading relationship that currently exists between the auditee's and auditor's organisations.
- D. The extent to which the auditee Is conforming to the requirements set out in ISO 45001.
- E. The extent to which the auditee is conforming to the OH&S requirements contained in supply contracts with the auditing organisation.
- F. Whether the audit has correctly performed in current contracts with other customers.
- G. The extent of the auditee's documented information system.
Answer: C,D,E
Explanation:
The closing meeting of a second-party audit focuses on the findings, conformance to agreed requirements, and areas for improvement. ISO 19011:2018 provides guidance on closing meetings, stating that the results of the audit, including conformity with criteria, must be reviewed and agreed upon.
Analysis of Options:
A: The names and email addresses of attendees at the closing meeting:
Irrelevant. Attendance details are not part of the audit discussion.
B: The extent of the auditee's documented information system:
While relevant during the audit, it is not typically a focus in the closing meeting.
C: The extent to which the auditee is conforming to OH&S requirements in supply contracts:
Correct. Second-party audits often assess compliance with contractual requirements.
D: The extent to which the auditee conforms to ISO 45001 requirements:
Correct. The core purpose of the audit is to evaluate conformity to ISO 45001.
E: The nature of the trading relationship between the organizations:
Correct. The trading relationship often shapes the scope and context of second-party audits.
F: Whether the audit has correctly performed in current contracts with other customers:
Irrelevant. The focus is on the specific audit, not contracts with other customers.
G: Whether the work instructions for a specific OH&S process are focused on efficiency:
Irrelevant. Efficiency is not the primary focus of an OH&S audit.
ISO Reference:
ISO 19011:2018, Clause 6.6.1: Conducting the closing meeting.
ISO 45001:2018, Clause 9.2: Internal audit requirements.
NEW QUESTION # 44
......
If you can own the certification means that you can do the job well in the area so you can get easy and quick promotion. The latest ISO-45001-Lead-Auditor quiz torrent can directly lead you to the success of your career. Our materials can simulate real operation exam atmosphere and simulate exams. The download and install set no limits for the amount of the computers and the persons who use ISO-45001-Lead-Auditor Test Prep. The ISO-45001-Lead-Auditor test prep mainly help our clients pass the ISO-45001-Lead-Auditor exam and gain the certification. The certification can bring great benefits to the clients. The clients can enter in the big companies and earn the high salary. You may double the salary after you pass the ISO-45001-Lead-Auditor exam.
ISO-45001-Lead-Auditor Exams Dumps: https://www.validexam.com/ISO-45001-Lead-Auditor-latest-dumps.html
